BLOG
Injection mould requirements for injection moulding
Dec 01,2023
Injection moulding is moulded in an injection mould with geometrical limitations of the mould composition, which does not require high strength of the melt. Injection moulding- filling the mould with plastic under pressure, directly injecting the melted plastic into the mould, suitable for wall thickness above 1MM, all kinds of structural products.
Plastic injection mold acceptance criteria
Oct 10,2023
The surface of the product is not allowed to defects: lack of material, burnt, top white, white line, phi peaks, blistering, pulling white (or pulling crack, pull off), baking marks, wrinkles.
Injection molds, this time the talk is very comprehensive!
Oct 10,2023
Mould mainly consists of pouring system, temperature control system, molding parts and structural parts. Among them, the pouring system and molding parts are the parts which are in direct contact with the plastic and change with the plastic and products, which are the most complicated and changeable in the plastic mold and require the highest processing finish and precision.
Reasons for surface defects in injection moulds
Jul 19,2023
Production of injection molded products, are required to use the injection mold processing moulds, generally under normal circumstances, through this injection molding method of production of plastic products, the surface has a better gloss as well as colour, but there are times when some shortcomings will inevitably occur, in addition to the material of the plastic itself, the problem of the coloring agent as well as the surface of the mould, in addition to the gloss, injection molding processing will also be what reasons will cause such an impact?
What you must know about injection molds, find out!
Jul 04,2023
The injection mold consists of two parts: the moving mold, which is mounted on the moving template of the injection molding machine, and the fixed mold, which is mounted on the fixed template of the injection molding machine. During injection molding, the moving mold and the fixed mold are closed to form the pouring system and the cavity, and the moving mold and the fixed mold are separated when the mold is opened in order to take out the plastic products.
Injection mold failure of a few troubleshooting tips
Jun 23,2023
Briefly describe the influence of mold temperature on product deformation?
DO YOU HAVE QUESTIONS?
Get In Touch With Us!